Copper Tubes For MGPS
Approx. Rs 540 / Kilogram
- Minimum Order Quantity: 100 Kilogram
- Hollow Sections: Circular
- Unit Pipe Length: Customized
- Size: 1''-2'', 2''-3'', 1/4''-1''
- Length: 4-6 meters, 0-2 meters, 2-4 meters, 6-8 meters
- Type: Seamless
- Condition: New
- Application: Gas Handling, Hospital
Medical Grade Copper Tubes as per EN 13348 / BS EN 1057 Specification |
Sr. No. | Outer Diameter MM | Wall Thickness MM | Wall Thickness Tolerance | Temper | Length (Meter) | Weight Per Meter (in Kg) |
Dimension | Technical Details |
1 | 10 | 0.6 | +/- 10% | Half Hard | 3 Meter. | 0.158 |
2 | 12 | 0.7 | +/- 10% | Half Hard | 3 Meter. | 0.222 |
3 | 15 | 0.9 | +/- 10% | Half Hard | 3 Meter. | 0.356 |
4 | 22 | 0.9 | +/- 10% | Half Hard | 3 Meter. | 0.533 |
5 | 28 | 0.9 | +/- 10% | Half Hard | 3 Meter. | 0.685 |
6 | 35 | 1.2 | +/- 10% | Half Hard | 3 Meter. | 1.139 |
7 | 42 | 1.2 | +/- 10% | Half Hard | 3 Meter. | 1.375 |
8 | 54 | 1.2 | +/- 10% | Half Hard | 3 Meter. | 1.780 |
9 | 76 | 1.5 | +/- 15% | Half Hard | 3 Meter. | 2.096 |
10 | 108 | 1.5 | +/- 15% | Hard | 3 Meter. | 2.992 |
- Port of Dispatch: Jamnagar
- Delivery Time: 2-3 Weeks
Copper Pipe for Medical Gas Pipeline System (MGPS)
Approx. Rs 510 / Kg
- Minimum Order Quantity: 100 Kg
- Thickness(mm): .5 to 4
- Shape: Round
- Application: Medical Gas Pipeline System
- Size: 3"-4"
- Unit Length: 18 m, 24m
- Alloy Or Not: Is Alloy
Medical Grade Copper Pipes At Metal Alloys Corporation we proudly manufacture marked Medical Grade Copper Pipes used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, Nursery etc). Pipes facilitate this in most effective manner.
marked medical grade copper tubes are manufactured as per EN13348 / BS EN 1057 specifications. The pipes are manufactured under thorough inspections and quality control measures.
marked medical grade copper tubes are available in size range 6mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard conditions and Length 3 meter as per requirement.
Pipes are subjected to Third Party Inspection agencies like Lloyds, SGS, TUV as per customer demand.
Mandatory Specifications | Particular | Standard | METALCO |
| CHEMICAL COMPOSITION | Copper (Cu) + Silver (Ag) | 99.90% | Spectro Analysis done per heat as per standard tolerances. |
| Phosphorous | 0.015% to 0.04% |
| CARBON CONTENT TEST | Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated. | Tested with Combustion Method as per EN723:2009 |
|
| TENSILE/ELONGATION TEST |
| Temper | Tensile Strength | Elongation | Hardness (Indicative) | |
| As per EN1773 | Common Term | MPa min. | A % min | HV 5 |
| R220 | annealed | 220 | 40 | (40 to 75) | Specifications maintained with help of In house testing facility. |
| R250 | half hard | 250 | 30 | (75 to 100) |
| R290 | hard | 290 | 3 | (min. 100) |
| DRIFTING TEST | Depending on Size and Temper Mandatory/Agreed Terms | Conical Mandrel @ 45º with tube end expanding 30º |
| FREE FROM DEFECT TEST | Eddy Current Test for detection of local defects | EDDY Current Test Conducted in accordance with EN1971 |
| CLEANLINESS REQUIREMENT | Degreased, End Caps | Degreasing and End caps are fixed at both end of the pipe. |
| Nominal Outside | Tolerance on wall thickness |
| diameter (mm) | e< 1 mm(%) | e> 1 mm(%) |
| < 18 | 10 | 13 |
| 18 | 10 | 15 |
Copper Tubes EN 13348
Approx. Rs 540 / Kg
- Minimum Order Quantity: 100 Kg
- Surface finish: Smooth
- Material: Copper
- Hallow Sections: Circular
- Type: Seamless
We are one of the leading manufacturer and supplier of Copper Tubes EN 13348. We obligated to meet the quality standards as per the customer demand .
