Astm B 111 C 70600 Copper Nickel Tube
Approx. Rs 700 / Kg
- Usage/Application: industry
- Place Of Origin: Pan India
- Hollow Section: Circular
- Color: Brown
- Country of Origin: Made in India
C70600 , Copper nickel offers excellent corrosion resistance, especially in marine salt water environments. The main, wrought coppernickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion.
TYPICAL USES for C70600 Copper Nickel "90/10":- AUTOMOTIVE: Power Steering Tube, Brake Lines
- CONSUMER: Screw Lamp Bases
- INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators
- MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses
- PLUMBING: Flanges
Equivalent Specifications| SPECIFICATIONS | DESIGNATION |
|---|
| ISO | CuNi10Fe1Mn |
| Europen | CuNi10Fe1Mn |
| BS | CN 102 |
| JIS | C 7060 |
| Russian | MNZMo10-1-1 |
| Cu | Fe | Pb | Mn | Ni | Zn |
|---|
| Min/Max | Rem | 1.0 - 1.8 | 0.05 | 1 | 9.0 - 11.0 | 1 |
| Nominals | 88.6000 | 1.4000 | - | - | 10.0000 | - |
| Product Property | US Customary |
|---|
| Coefficient Of Thermal Expansion | 9.5 10−6Per °F (68-572 F) |
| Density | 0.323 Lb/In3 At 68 F |
| Electrical Conductivity | 9 %IACS @ 68 F |
| Electrical Resistivity | 115.0 Ohms-Cmil/Ft @ 68 F |
| Melting Point - Liquidus | 2100 F |
| Melting Point - Solidus | 2010 F |
| Modulas Of Elasticity In Tension | 18000 Ksi |
| Modulus Of Rigidity | 6800 Ksi |
| Specific Gravity | 8.94 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F At 68 F |
| Thermal Conductivity | 26.0 BTU In/Hr.Ft2.°F @ 68 F |
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 8mm To 100 Mm |
| HEX | 10mm To 60mm> |
| SQUARE | 10mm To 60mm |
| FLAT | 10mm Min Thickness And Max Width 120mm |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
