High Tensile Brass Hollow Rods

C66800 High Tensile Brass Hollow Rods

Rs 600 / Kg

Finish Type: brass
Material: Brass
Color: yellow
Usage/Application: Hardware Fitting
Shape: Round
Type: Brass

The C66800 Manganese Brass comes under the category of naval brass and is composed of 60% copper, 39.2% zinc and 0.8% tin. In compliance with typical naval brass the alloy possess good strength as well as rigidity. The corrosion resistance towards sea water is achieved due to the presence of zinc in place of tin. The addition of tin also makes the alloy resistant towards dezincification, fatigue, galling, and stress corrosion cracking.

Typical Applications:

Gears
Sealing Rings
Thrust Bearings
Bushings
Cams
Spindles
Bearings
Idler Pins
Connecting Rods
Drive Shafts
Valve Seats
Sleeve Bearings
Piston Heads

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	C67300
Europen	C67400

Chemical Composition

	Cu	Al	Fe	Pb	Mn	Ni	Si	Sn	Zn
Min/Max	60.0-63.0	.25	.35	.50	2.0-3.5	.25	.50-1.5	.30	Rem.
Nominals	61.5	-	-	-	2.7	-	1.0	-	-

Sizes Available

HOLLOW RODS	Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification